حصريا لمنتدانا الغالى شرح الاميو ام بوكس

[haco1971]

حصريا لمنتدانا الغالى شرح الاميو ام بوكس

لمزيد من التفاصبل عن mbox

Mbox How To
We will try to explain here how to start with Mbox.
You can NOT reply to this topic.
Only the moderators can add or change here.
If there is something wrong or you want to add comments, please contact one of the moderators to do this.
This topic refers always to the latest version of Mbox. (we will try to keep it updated)

Ok, here we go.

To start Mbox you need to configure mbox.cfg first.
These parameters you must set before you can start Mbox:

D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein

T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }

K: { /var/keys/ }
// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }

P: { /tmp/pmt.tmp }
// P option -> PMT ******** (Dont used with linux and ******s)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can // { 1/tmp/camd.socket } for enigma 1 // { 2/tmp/camd.socket } for enigma 2 Now for the start of Mbox you need to know where the mbox.cfg path is. The default path for mbox.cfg is /var/keys/ For other paths you must start mbox with path as argument!!! For some receivers like Ipbox and Kathrein there is no /var/keys/ so you must start mbox always with arguments. Example: without arguments ./mbox or ./var/***/mbox with arguments ./mbox /data/keys/mbox.cfg or ./var/***/mbox /data/keys/mbox.cfg To STOP Mbox you need to create mbox.kill. Put this mbox.kill in the temp dir of Mbox. T: path (look your settings in mbox.cfg) Example T: { /tmp/ }: touch /tmp/mbox.kill Other parameters of mbox.cfg that are interesting: M: { 1 } // M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0


Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations

Only debug file: Z: { 12 } { 127.0.0.1 8000 }
only send debug to IP: Z: { 11 } { 127.0.0.1 8000 }
Both file and IP: Z: { 13 } { 127.0.0.1 8000 }

L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1

If you run Mbox on a server then you can't use level0 cards so you have to set:
L: { 0 }


About the cwshare.cfg:

If you don't use a brascet and you must set some other options after the brascet then don't leave it empty.
Put a zero in it so Mbox knows it's not used.
Example: C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 0 } { 0 }

When using Mbox and Newcs on the same box/server then Mbox can see those cards as local.
But you must make a connection ( C-line in cwshare.cfg) with IP 127.0.0.1.
Only then you will have these cards as local in your Mbox server.

About D line in cwshare.cfg file ...
Now you can set what provids boxids you want to reshare with another peer(s)

This is standard D line
=======================
D: { IP { port1 port2 { pass { level1 level2 }}}}


This is my new upgraded D line
===============================
D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0000 } { 0 } send filter
{ 0000 } { 0 } receive filter


D: { IP { port1 port2 { pass { level1 level2 }}}}
{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} send filter
{ xxyy !!in hex!!!} { provid-boxid-boxid;provid;provid-boxid; ...!!in hex!!!} receive filter

for both brascets

xx -> 00 disabled
xx -> 01 allow only this cards for provid to be reshared received
xx -> 02 denied only this cards for provid to be reshared received

yy -> how much provids is in next brascet dont caculate boxids

1st example:
============

D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
{ 0102 } { 00010080;00010081-0A0A-0B0B; }



{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }

xx is 01 ,ALL cards for (0001006A) provid is SENT to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) will NOT be sent!!

yy is 02 ,there is only 2 provids in next bracket dont caculate boxids


{ 0102 } { 00010080;00010081-0A0A-0B0B; }
xx is 01 ,ALL cards for (00010080) provid is RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, ALL others provids will be IGNORED!!

yy is 02 ,there is only 2 provids in next bracket dont caculate boxids



2nd example:
============

D: { IP { port1 port2 { pass { level1 level2 }}}}
{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
{ 0202 } { 00010080;00010081-0A0A-0B0B; }


{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
xx is 02 ,ALL cards for this (0001006A) provid is NOT sent to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) are !!

yy is 02 ,there is only 2 provids in next bracket dont caculate boxids


{ 0202 } { 00010080;00010081-0A0A-0B0B; }
xx is 02 ,ALL cards for (00010080) provid is NOT RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, all others provids will be received!!

yy is 02 ,there is only 2 provids in next bracket dont caculate boxids




NOTICE: MBOX WILL NOT COMPLAIN IF YOU USE OLD D LINE STYLE !!!!!!!!!!!!!



Connecting to newcamd server program Newcs
==========================================

example:
C: { server_ip server_listening_port user**** password des_key } { x } { xxxxyyyyxxxyyyy;......}
C: { 127.0.0.1 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0100006a:0100006B;}

[second brascet] -> { x } max. number ecms in buffer ,decimal !!!!!

[third brascet] { 0100006a:0100006B;} is used if you want to change caidprovid from what newcs detected to caidprovid to use with gboxx protocol so 0100006A will be 0100006B in gboxx protocol




Resending ECM(s) on timeout interval
====================================
O: { xxxx yyyy }

example:
O: { 4000 2000 }

4000 (4 seconds)-> resend current ecm on boxid if no dcw
2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxid's



NDS system ->Resending ECM(s) on timeout interval
=================================================
N: { xxxx yyyy }

example:
N: { 400 200 }

default disabled...


Add more cards for CaidProvid
=============================
X+: { xxxxyyyy:zz;xxxxyyyy:zz; } // zz -> max. is 30 !!!!!

example:
X+: { 0100006A:15; }

With X+ active, for caidprovid:0100006A max. cards for use is 15.



About the 12000.list or the port.list:
You need the 12000.list file to run Mbox with your local cards!!!
If you are sure that your card can decrypt all Sids then put ONLY this in the port.list file:
SF: { 0000 }

Now you must make file called "port.list" in
K: path (look your settings in mbox.cfg)

"Port" is newcs port, look into the newcs.xml file and search for newcamd_port.
Code:


......
12000
.......


So the file will be called 12000.list.
If you have 17050 then the file**** will be 17050.list


Pls use SID pids , CHIDs for Irdeto or G line, because now mbox send only one ECM and wait response from newcs before it send new ECM.

//this is for forbiden SID pids or Irdeto chids ..
//example
SF: { 04A0 } -> forbiden SID pid -> your card cant decrypt this channel
SF: { 0220 }
IF: { 0203 } -> forbiden Irdeto ChID -> your card cant decrypt this ChID
IF: { 0302 }
G: { 0100006A } -> dont list and reshare this provid from your card if card cant decrypt that, mbox will just flood newcs with bad ECMs for this provid.


//max forbiden SID pids or ChIDs is 150.
//max G lines is 15.


//OR to enable SID pids or Irdeto chids
//example
SA: { 04A0 } -> enable SID pid -> your card can decrypt this channel
SA: { 0220 }
IA: { 0203 } -> enable Irdeto ChID -> your card can decrypt this ChID
IA: { 0302 }
G: { 0100006A } -> dont list and reshare this provid from your card if card cant decrypt that, mbox will just flood newcs with bad ECMs for this provid.

//NOTE: YOU CANT MIX FORBIDEN AND ENABLED PIDS.



About the add.data file:

You don't need the add.data file to run Mbox!!!

The add.data file gives you the option to:

- change I,X,O,N line
- to delete running D line
- to add new D line(without filter rules)
- to resend "R" hello msg to all peers while mbox is running.

Write new values in "add.data" file and put it in folder from P: line. (look your settings in mbox.cfg)

NOTE: Max time to wait before changes take affect is 2 minutes, new values for I,X,O,N will NOT be saved in cwshare.cfg but new D or C line will be saved.
"add.data" file will be deleted after reading (read add.data.example) !

#D: { ip { port1 port2 { pass { level1 level 2 }}}} -> remove running D line
D: { ip { port1 port2 { pass { level1 level 2 }}}} -> add new D line without restarting mbox,new D line will be saved in cwshare.cfg
R ->Resend hello msg to all peers
X: { x } -> Change running X value
I: { x } -> Change running I value
O: { xxxx yyyy } -> Change running timeout intervals
N: { xxxx yyyy } -> Change running timeout intervals for NDS system
C: { server_ip server_listening_port user**** password des_key } { x } { xxxxyyyyxxxyyyy;......} -> add new C line

المصدر

[moamer119]

لو كان اخي الشرح بالصور وبالعربي ولك جزيل الشكر على كل مجهود بذلته

[elsheme]

الشرح بالعريى لوسمحت

[Zoopsylip]

While most diet pills aim to produce weight loss in the form of water and muscle weight, Zenslim (اهيرëèى)
is designed to target fat without affecting water and muscle weight! Designed to retain muscle mass and eliminate fat,
Zenslim (اهيرëèى) is designed to successfully eliminate excess weight and keep it off forever! Users of Zenslim (اهيرëèى)
experience 93% satisfaction rate.

[Zoopsylip]

Zenslim (اهيرëèى) is the best selling fat burner and has been dubbed The Most Powerful
Weight Loss Supplement on the market by industry experts. Zenslim (اهيرëèى) uniquely takes
users beyond mere weight loss. Zenslim (اهيرëèى) is the only weight loss supplement on the
market designed to help you drop weight, reduce **** fat and keep it off for good! Zenslim (اهيرëèى)
works because it contains 5 powerful patented and proven fat burning and muscle building ingredients com***ed to perfection.

[Zoopsylip]

Zenslim (اهيرëèى) has gained a reputation among consumers and experts as the most powerful
weight loss pill available. Zenslim (اهيرëèى) formula of 5 clinically proven fat-burning ingredients as such
as psyllium, Super Citrimax, Cissus Quadrangularis, caralluma fimbriata, stevia, bioperine, and emblica stands
head and shoulders above every other diet pills.