::: دورة تكوينية لمعرفة الفولتيات ووظيفة جميع ارجل stk الموجودة بدائرة البور :::

[حمدى البندى]

معرفة فولتيات ووظيفة جميع ارجل STK الموجودة بدائرة البور

VCR Hybrid Voltage Regulator Pinouts

STK791

VCR Regulator.

(From Ken Koskie (aw345@lafn.org).)

The voltages should be approximately the same in all modes: Off, EE, Play,
and Record.

Pin 1: VI1 6.7 V
Pin 2: VI1 6.7 V
Pin 3: 0.0V
Pin 4: 0.0V
Pin 5: VO 6.8 V
Pin 6: NC
Pin 7: GND
Pin 8: VI2 18.5 V


STK5331

* Three output series regulator in an eight-pin package:

Pin 1: +5.1 V output
Pin 2: +6.05 V input
Pin 3: Load resistor
Pin 4: Load resistor
Pin 5: +12.3 V output
Pin 6: on/off
Pin 7: +30 V max input
Pin 8: Chassis


STK5332

VCR Positive Voltage Regulator: 13 V at 1 A, 6.05 V at 1 A, 5.1 V at .5 A.

Pin 1: VO3 +5.1 V
Pin 2: VO2 +6.05 V
Pin 3: VI2
Pin 4: Vb
Pin 5: VO1 +13 V
Pin 6: Gnd/SW
Pin 7: VI1
Pin 8: Gnd


STK5333 - ECG7036

VCR Positive Voltage Regulator. 15 V at 1 A, 5.8 V at 1 A, 5.1 V at 1 A,
8 Pin SIP.

Pin 1: GND
Pin 2: VO3 +5.1 V
Pin 3: VO2 +5.8 V
Pin 4: VI2
Pin 5: Vb
Pin 6: VO1 +15 V
Pin 7: SW
Pin 8: VI1


STK5338

* Three output series regulator in an eight-pin package.

Pin 1: Chassis
Pin 2: 5.1 V output
Pin 3: 5.8V output
Pin 4: 30V max. do. input
Pin 5: Load resistor
Pin 6: 12.3V output
Pin 7: On/off switching
Pin 8: 30V max d.c. input


STK5339

* Three-output series regulator in an eight-pin package.

Pin 1: Chassis
Pin 2: +5.1 V output
Pin 3: +5.8 V output
Pin 4: +30 V max input
Pin 5: Load resistor
Pin 6: +12.3 V output
Pin 7: On/off switching
Pin 8: +30 V max input


STK5342 - ECG7035

VCR Positive Voltage Regulator. 12.3 V @ 1A, 6.0 V @ 1A, 5.3 V @ .6 A.

Pin 1: VO3 +5.25 V
Pin 2: VO2 +6.0 V
Pin 3: Vb
Pin 4: Vb
Pin 5: VO1 +12.3 V
Pin 6: Cutoff
Pin 7: VI1
Pin 8: GND


STK5372 - ECG1883

VCR Positive Voltage Regulator. 12.1 V @ .8 A, 12 V @ .8 A, 5.3 V @ 1 A.
8 pin SIP.

Pin 1: VO3 5.3 V (switched)
Pin 2: Cutoff (control input for 12 V output)
Pin 3: VI2 (input for VO3, 10 V typical)
Pin 4: VO2 12 V (switched)
Pin 5: VO1 12.1 V (and input to VO2)
Pin 6: Vb (control for VO1)
Pin 7: VI1 (input for 12 V outputs, 18 V typical)
Pin 8: Gnd


STK5421

* Four-output series regulator in a fifteen-pin package.

Pin 1: +12.3 V output
Pin 2: Load resistor
Pin 3: +12 V output (unswitched)
Pin 4: Decoupling
Pin 5: +30 V max input
Pin 6: Link to pin 5
Pin 7: +30 V max input.
Pin 8: +16 V output (unswitched)
Pin 9: Link to pin 8
Pin 10: +9.55V output
Pin 11: Load resistor
Pin 12: Chassis
Pin 13: On/off switching
Pin 14: Decoupling
Pin 15: Decoupling


STK5422

* Four output series regulator in a fifteen pin package.

Pin 1: +12V output
Pin 2: Load resistor
Pin 3: +12V output
Pin 4: Decoupling
Pin 5: +30 V max input
Pin 6: Link to pin 5
Pin 7: +30 V max input
Pin 8: +13 V output
Pin 9: Link to pin 8
Pin 10: +9.5 V output
Pin 11: Load resistor
Pin 12: Chassis
Pin 13: On/off switching
Pin 14: Decoupling
Pin 15: Decoupling


STK5431

Pin 1: Out 5.1 V
Pin 2: NC
Pin 3: Out 12 V
Pin 4: Ctrk 12 V
Pin 5: In 12 V
Pin 6: In 5 V
Pin 7: In 15 V
Pin 8: In 9.5 V
Pin 9: Out 15 V
Pin 10: Out 9.5 V
Pin 11: Ctrl 9.5 V
Pin 12: Gnd
Pin 13: Ctrl 4 V
Pin 14: Ctrl .6 V
Pin 15: Ctrl 15 V


STK5436 - ECG1876

Pin 1: VO4 +6V
Pin 2: NC
Pin 3: VO3 +12V
Pin 4: Bypass
Pin 5: VI2
Pin 6: VO3 +12V
Pin 7: VI1
Pin 8: VO1 +13V
Pin 9: VO1 +13V
Pin 10: VO2 +9.5V
Pin 11: IB2
Pin 12: GND
Pin 13: On/Off
Pin 14: Bypass
Pin 15 Bypass


STK5441 - ECG1734

VCR Positive Voltage Regulator. 12V @ 2A, 9V @ 1A, 5.5V @ .5A. 15 Pin SIP.

Pin 1: VO3 +5.5 V
Pin 2: NC
Pin 3: NC
Pin 4: NC
Pin 5: NC
Pin 6: VI2
Pin 7: VI1
Pin 8: VO1 +12V
Pin 9: VO1 +12V
Pin 10: VO2 +9V
Pin 11: Bias
Pin 12: GND
Pin 13: Cutoff
Pin 14: Bypass
Pin 15: Ripple Filter


STK5451 - ECG1735

VCR Positive Voltage Regulator. 16V @ 1A, 12V @ 1A, 12V @ 1.5 A,
11.9 V @ 1.5A.

Pin 1: 11.9 V Output 4
Pin 2: Control Volt
Pin 3: DC Input 2
Pin 4: Reference input
Pin 5: 12V Output 3
Pin 6: Reference input
Pin 7: 16V/12V Output 1/2
Pin 8: Reference input
Pin 9: DC input 2
Pin 10: DC input 1
Pin 11: Hi/Lo volt switch
Pin 12: GND
Pin 13: on/off control
Pin 14: Heater switch (??)
Pin 15: Reference input


STK5461 - ECG7027

VCR Positive Voltage Regulator. 12V @ 1A, 12V @ 1A, 5.1V @ .5A. 15 Pin SIP.

Pin 1: VO3 +5.1 V
Pin 2: NC
Pin 3: NC
Pin 4: NC
Pin 5: NC
Pin 6: VI2
Pin 7: VI1
Pin 8: VI1
Pin 9: VO1 +12V
Pin 10: VO2 +12V
Pin 11: IB2
Pin 12: GND
Pin 13: Cutoff VO1
Pin 14: Cutoff VO2
Pin 15: IB1


STK5464 - ECG7023

VCR Positive Voltage Regulator. 12V @ 1A, 12V @ 1A, 5.3V @ 1A. 12 Pin SIP.

Measured input voltages (your mileage may vary): VI1 = 18 V, VI2 = 8.5 V

Pin 1: VO3 +5.3 V
Pin 2: NC
Pin 3: NC
Pin 4: NC
Pin 5: VI2
Pin 6: VI1
Pin 7: VI1
Pin 8: VO2 +12V
Pin 9: VO1 +12V
Pin 10: VO1/VO2 Cutoff
Pin 11: GND
Pin 12: Vb


STK5466 - ECG1821

VCR Positive Voltage Regulator.

Pin 1: VO3 +5.3 V
Pin 2: NC
Pin 3: NC
Pin 4: NC
Pin 5: NC
Pin 6: VI3
Pin 7: VI1 and 2
Pin 8: VI1 and 2
Pin 9: VO2 +12 V
Pin 10: VO1 +12 V
Pin 11: NC
Pin 12: GND
Pin 13: On/off
Pin 14: On/off
Pin 15: Vb (probably around 13-14 V)


STK5467

* Three output series regulator in a twelve pin package.

Pin l: +5.3 V Output
Pin 2: NC
Pin 3: NC
Pin 4: NC
Pin 5: +30 V max input
Pin 6: +30 V max input
Pin 7: Link to pin 6
Pin 8: +12.1 V output
Pin 9: +12.1 V output
Pin 10: Pin 9 output cut off
Pin 11: Chassis
Pin 12: Load resistor


STK5471 - ECG1822

VCR Positive Voltage Regulator. 12 V @ 1.5 A, 12 V @ 1.5 A, 5.3 V @ .5 A.
10 Pin SIPP.

Pin 1: Iout 3 for 5.3 V
Pin 2: Vout 3 control
Pin 3: Iin 3
Pin 4: Iout 2 for 12 V (emitter)
Pin 5: Ib 2 (****)
Pin 6: Iin 2 (collector)
Pin 7: Iout 1 for 12 V (emitter)
Pin 8: Ib 1 (****)
Pin 9: Iin 1 (collector)
Pin 10: GND

It appears as though Pin 1 is the output of an IC regulator for the 5.3 V.
Pin 3 is the Vin - 20 V typ. Pin 2 is some kind of on off control.

Pins 4-6 and 7-9 are the emitter, ****, and collector for the two
12 V outputs. These are simple Darlington transistors setup to
drive the outputs in an emitter follower configuration.
Vin typ of 30 V.

Deduced from schematic in ECG.


STK5477 - ECG7034

VCR Positive Voltage Regulator. 12v @ 1A, 12V @ 1A, 5.1V @ 1A.

Pin 1: GND
Pin 2: VI2
Pin 3: N/C
Pin 4: VO3 +5.1V
Pin 5: VO2 +12V
Pin 6: VB
Pin 7: VI1
Pin 8: VO1 +12V
Pin 9: VB
Pin 10: VI1
Pin 11: N/C
Pin 12: GND


STK5481 - ECG1823

Pin 1: Ib3
Pin 2: VI2
Pin 3: VO4 +5.3 V
Pin 4: VO3 +12.1 V
Pin 5: VO3/VO4 ON/OFF
Pin 6: VO2 +12.2 V
Pin 7: Ib2
Pin 8: VI1
Pin 9: VO1 +12.0 V
Pin 10: Ib1
Pin 11: VI1
Pin 12: GND


STK5482

* Four output series regulator in a fifteen pin package.

Pin 1: Chassis
Pin 2: +30 V max input
Pin 3: +5.1 V output
Pin 4: +12 V output
Pin 5: Bias/+12V output switching
Pin 6: +30 V max input
Pin 7: +5.8 V output
Pin 8: Bias/pin 7 output switching
Pin 9: Link to pin 2
Pin 10: Load resistor/pin 7 output switching
Pin 11: +13/+15V output
Pin 12: Pin 11 output switching
Pin 13: Link to pin 6
Pin 14: Pin 11 output switching
Pin 15: Chassis


STK5486 - ECG7038

VCR Positive Voltage Regulator. 13V @ 1A, 12.2V @ 1A, 6V @ 1A, 5.1V @ 1A,
5.1V @ 1A, 15 Pin SIP.

Pin 1: VO5 +5.1 V
Pin 2: NC
Pin 3: VO4 +5.1 V
Pin 4: VI2
Pin 5: NC
Pin 6: VO3 +6 V
Pin 7: VB
Pin 8: VB
Pin 9: VO2 +12.2 V
Pin 10: Cutoff
Pin 11: VI1
Pin 12: VO1 +13 V
Pin 13: Cutoff
Pin 14: VI1
Pin 15: GND

[فادى سعيد]

لك كل الشكر والتقدير علي كل ماتقدمه من اعمال مفيده

ولك تحياتي

[ابوعبدة1]

يسلموووووووووووووووووووووووا يداك

جزاك الله خيرااااااااااا

[حمدى البندى]

[center]

بسم الله الرحمن الرحيم

رسالة شكر وتقدير....

هذه رسالة شكر وتقدير مني للاستاذ مدحت والاستاذ فادى مشرفى المنتدي الرائع والي كل من يطلع على هذا الموقع الجبار والمميز والذي لطالما حلمنا به وعلى عطائهم اللا محدود ونظرتهم العميقة والجادة والمواضيع الرائعة التي نستفيد منها في حياتنا العلمية والعملية والافكارالمتجددة والمتطورة والفريدة التي تخطت محيط الوطن ليشمل موسوعة بلدانية شاسعة وهذا اشبه مايكون بالمستحيل لاكن مع سيدي يكون المستحيل واقعا ملموسا يشهد بانطلاقته وقوته كل فرد من ابناء العرب سواء في بلادنا العربية او الاجنبية

ويشرفنى ان اقف اجلالا ووتبجيلا ونزجيكم احر المشاعرالتى تعبر عن التقدير المحفوف بالعرفان لجهودكم ومساعدتكم وخدماتكم التى ساهمت بشكل فعال فى تحقيت أهداف هذا الصرح وإثرائة بكل ماهو مفيد وقيم فدمتم زهرة فواحة تنشر اريجها بين ثنايا المنتديات

فكل الحب والتقدير لكم ,وادعوا الله من هذا المكان ان ييسر اموركم ويثيبكم بكل الاجر والثواب ويعطيكم مابتغيتم ويوسع عليكم انه هو السميع المجيب

والشكر الفياض لاخى /ابو عبدة لة منى كل الشكر والوفاء

والسلام عليكم ورحمة الله وبركاته[
/

حمدى البندى

[الصاوى ابومريم]

بطل نفاق ورياء

الموضوع كله منقول من منتدى اخر انا لم اذكر اسمه حفاظا على القوانين اللى مش بتحترمه

خليك احسن من كده

[حمدى البندى]

شكرا مرورك محمد بية شحاتة لك منى كل الشكر والتقدير

[الصاوى ابومريم]

بارك الله فيك اخى بندى بيه
جميل جدا
منور اخى