اقتباس:
المشاركة الأصلية كتبت بواسطة tht22
السلام عليكم ورحمة الله وبركاته
فى التجريب انشاء الله
|
ثبت الاصدارالموجودعلى الاسطوانه نفس المشكل
004: Using Mode-A to scan VGA port...
005: Mode-A cannot identified the circuit board, change line sequence to Mode-D and continue to identifying...
006: Mode-D cannot identified the circuit board, change line sequence to Mode-B and continue to identifying...
007: Mode-B cannot identified the circuit board, change line sequence to Mode-C and continue to identifying...
008: Scan SPI extension interface...
009: Scan MICROCHIP_ICSP interface...
010: Chip is not recognized, please check whether the circuit board is powered on and ISP cable is connected properly or not. If all ok, it maybe the chip is damage.
011: PEB-1 Expansion board no connect or no response،£
012: PEB-1 Expansion board no connect or no response،£
013:
http://www.ifix.net.cn/thread-47221-1-1.html
014: The currently selected:IT8XXX_ISP @PEB-1, capacity: 1Mbits, 128Kbytes.
015: >------------------------------------OK---------------------------------------<
016:
http://www.ifix.net.cn/thread-47221-1-1.html
017: The currently selected:IT8XXX_ISP @PEB-1, capacity: 1Mbits, 128Kbytes.
018: >------------------------------------OK---------------------------------------<
019: No chip on the adapter, or socket locking not properly!
020: You have chosen "OK", continue to detect Programmer socket pins/interface...
021: No chip on the adapter, or socket locking not properly!
022: You have chosen to enter the Auto ISP mode...
023: Using Mode-A to scan VGA port...
024: Mode-A cannot identified the circuit board, change line sequence to Mode-D and continue to identifying...
025: Mode-D cannot identified the circuit board, change line sequence to Mode-B and continue to identifying...
026: Mode-B cannot identified the circuit board, change line sequence to Mode-C and continue to identifying...
027: Scan SPI extension interface...
028: Scan MICROCHIP_ICSP interface...
029: Chip is not recognized, please check whether the circuit board is powered on and ISP cable is connected properly or not. If all ok, it maybe the chip is damage.
030: PEB-1 Expansion board no connect or no response،£
031: PEB-1 Expansion board no connect or no response،£